Configuration Options for 18F6527

   Oscillator Selection:
     OSC = LP             LP
     OSC = XT             XT
     OSC = HS             HS
     OSC = RC             RC
     OSC = EC             EC-OSC2 as Clock Out
     OSC = ECIO6          EC-OSC2 as RA6
     OSC = HSPLL          HS-PLL Enabled
     OSC = RCIO6          RC-OSC2 as RA6
     OSC = INTIO67        INTRC-OSC2 as RA6, OSC1 as RA7
     OSC = INTIO7         INTRC-OSC2 as Clock Out, OSC1 as RA7

   Fail Safe Clock Monitor:
     FCMEN = OFF          Disabled
     FCMEN = ON           Enabled

   Internal External Osc. Switch Over:
     IESO = OFF           Disabled
     IESO = ON            Enabled

   Power Up Timer:
     PWRT = ON            Enabled
     PWRT = OFF           Disabled

   Brown Out Reset:
     BOREN = OFF          Disabled
     BOREN = ON           SBOREN Enabled
     BOREN = NOSLP        Enabled except SLEEP, SBOREN Disabled
     BOREN = SBORDIS      Enabled, SBOREN Disabled

   Brown Out Voltage:
     BORV = 46            4.5V
     BORV = 43            4.2V
     BORV = 28            2.7V
     BORV = 21            2.0V

   Watchdog Timer:
     WDT = OFF            Disabled
     WDT = ON             Enabled

   Watchdog Postscaler:
     WDTPS = 1            1:1
     WDTPS = 2            1:2
     WDTPS = 4            1:4
     WDTPS = 8            1:8
     WDTPS = 16           1:16
     WDTPS = 32           1:32
     WDTPS = 64           1:64
     WDTPS = 128          1:128
     WDTPS = 256          1:256
     WDTPS = 512          1:512
     WDTPS = 1024         1:1024
     WDTPS = 2048         1:2048
     WDTPS = 4096         1:4096
     WDTPS = 8192         1:8192
     WDTPS = 16384        1:16384
     WDTPS = 32768        1:32768

   MCLR Enable:
     MCLRE = OFF          Disabled
     MCLRE = ON           Enabled

   T1 Oscillator Enable:
     LPT1OSC = OFF        Disabled
     LPT1OSC = ON         Enabled

   ECCP2 Mux:
     CCP2MX = PORTB       Muxed with RB3
     CCP2MX = PORTC       Muxed with RC1

   Stack Overflow Reset:
     STVREN = OFF         Disabled
     STVREN = ON          Enabled

   Low Voltage ICSP:
     LVP = OFF            Disabled
     LVP = ON             Enabled

   Boot Block Size:
     BBSIZ = BB2K         2Kb Boot Block
     BBSIZ = BB4K         4Kb Boot Block
     BBSIZ = BB8K         8Kb Boot Block

   XINST Enable:
     XINST = OFF          Disabled
     XINST = ON           Enabled

   Background Debugger Enable:
     DEBUG = ON           Enabled
     DEBUG = OFF          Disabled

   Code Protection Block 0:
     CP0 = ON             Enabled
     CP0 = OFF            Disabled

   Code Protection Block 1:
     CP1 = ON             Enabled
     CP1 = OFF            Disabled

   Code Protection Block 2:
     CP2 = ON             Enabled
     CP2 = OFF            Disabled

   Boot Block Code Protection:
     CPB = ON             Enabled
     CPB = OFF            Disabled

   Data EEPROM Code Protection:
     CPD = ON             Enabled
     CPD = OFF            Disabled

   Write Protection Block 0:
     WRT0 = ON            Enabled
     WRT0 = OFF           Disabled

   Write Protection Block 1:
     WRT1 = ON            Enabled
     WRT1 = OFF           Disabled

   Write Protection Block 2:
     WRT2 = ON            Enabled
     WRT2 = OFF           Disabled

   Boot Block Write Protection:
     WRTB = ON            Enabled
     WRTB = OFF           Disabled

   Configuration Register Write Protection:
     WRTC = ON            Enabled
     WRTC = OFF           Disabled

   Data EEPROM Write Protection:
     WRTD = ON            Enabled
     WRTD = OFF           Disabled

   Table Read Protection Block 0:
     EBTR0 = ON           Enabled
     EBTR0 = OFF          Disabled

   Table Read Protection Block 1:
     EBTR1 = ON           Enabled
     EBTR1 = OFF          Disabled

   Table Read Protection Block 2:
     EBTR2 = ON           Enabled
     EBTR2 = OFF          Disabled

   Boot Block Table Read Protection:
     EBTRB = ON           Enabled
     EBTRB = OFF          Disabled