Configuration Options for 18F4480

   Oscillator Selection bits:
     OSC = LP             LP
     OSC = XT             XT
     OSC = HS             HS
     OSC = RC             External RC with OSC2 as divide by 4 clock out
     OSC = EC             EC with OSC2 as divide by 4 clock out
     OSC = ECIO           EC with OSC2 as RA6
     OSC = HSPLL          HS with HW enabled 4xPLL
     OSC = RCIO           External RC with OSC2 as RA6
     OSC = IRCIO67        Internal RC with OSC2 as RA6 and OSC1 as RA7
     OSC = IRCIO7         Internal RC with OSC1 as RA7 and OSC2 as divide by 4 clock out
     OSC = ERC1           External RC with OSC2 as divide by 4 clock out
     OSC = ERC            External RC with OSC2 as divide by 4 clock out

   Fail Safe Clock Monitor:
     FCMENB = OFF         Disabled
     FCMENB = ON          Enabled

   Internal External Osc. Switch:
     IESOB = OFF          Disabled
     IESOB = ON           Enabled

   Power Up Timer:
     PWRT = ON            Enabled
     PWRT = OFF           Disabled

   Brown Out Reset:
     BOR = OFF            Disabled
     BOR = SBORENCTRL     Controlled by SBOREN
     BOR = BOACTIVE       Enabled whenever Part is Active - SBOREN Disabled
     BOR = BOHW           Enabled in HW, SBOREN disabled

   Brown Out Voltage:
     BORV = 45            4.5V
     BORV = 42            4.2V
     BORV = 27            2.7V
     BORV = 20            2.0V

   Watchdog Timer:
     WDT = OFF            HW Disabled - SW Controlled
     WDT = ON             HW Enabled - SW Disabled

   Watchdog Postscaler:
     WDTPS = 1            1:1
     WDTPS = 2            1:2
     WDTPS = 4            1:4
     WDTPS = 8            1:8
     WDTPS = 16           1:16
     WDTPS = 32           1:32
     WDTPS = 64           1:64
     WDTPS = 128          1:128
     WDTPS = 256          1:256
     WDTPS = 512          1:512
     WDTPS = 1024         1:1024
     WDTPS = 2048         1:2048
     WDTPS = 4096         1:4096
     WDTPS = 8192         1:8192
     WDTPS = 16384        1:16384
     WDTPS = 32768        1:32768

   MCLR Enable:
     MCLRE = OFF          Disabled
     MCLRE = ON           Enabled

   Low Power Timer1 Oscillator:
     LPT1OSC = OFF        Timer1 Low Power Oscillator disabled
     LPT1OSC = ON         Timer1 Low Power Oscillator Active

   Port B Pins Configured for A/D:
     PBADEN = OFF         Port B<4> and Port B<1:0> Configured as Digital I/O Pins on Reset
     PBADEN = ON          Port B<4> and Port B<1:0> Configured as Analog Pins on Reset

   BackGround Debug:
     DEBUG = ON           Enabled
     DEBUG = OFF          Disabled

   Extended Instruction Set CPU:
     XINST = OFF          Disabled
     XINST = ON           Enabled

   Boot Block Size:
     BBSIZ = 1024         1K words (2K bytes) Boot Block
     BBSIZ = 2048         2K words (4K bytes) Boot Block

   Low Voltage Programming:
     LVP = OFF            Disabled
     LVP = ON             Enabled

   Stack Overflow/Underflow Reset:
     STVREN = OFF         Disabled
     STVREN = ON          Enabled

   Code Protection Block 0:
     CP0 = ON             Enabled
     CP0 = OFF            Disabled

   Code Protection Block 1:
     CP1 = ON             Enabled
     CP1 = OFF            Disabled

   Code Protection Block 2:
     CP2 = ON             Enabled
     CP2 = OFF            Disabled

   Code Protection Block 3:
     CP3 = ON             Enabled
     CP3 = OFF            Disabled

   Boot Block Code Protection:
     CPB = ON             Enabled
     CPB = OFF            Disabled

   Data EEPROM Code Protection:
     CPD = ON             Enabled
     CPD = OFF            Disabled

   Write Protection Block 0:
     WRT0 = ON            Enabled
     WRT0 = OFF           Disabled

   Write Protection Block 1:
     WRT1 = ON            Enabled
     WRT1 = OFF           Disabled

   Write Protection Block 2:
     WRT2 = ON            Enabled
     WRT2 = OFF           Disabled

   Write Protection Block 3:
     WRT3 = ON            Enabled
     WRT3 = OFF           Disabled

   Boot Block Write Protection:
     WRTB = ON            Enabled
     WRTB = OFF           Disabled

   Configuration Register Write Protection:
     WRTC = ON            Enabled
     WRTC = OFF           Disabled

   Data EEPROM Write Protection:
     WRTD = ON            Enabled
     WRTD = OFF           Disabled

   Table Read Protection Block 0:
     EBTR0 = ON           Enabled
     EBTR0 = OFF          Disabled

   Table Read Protection Block 1:
     EBTR1 = ON           Enabled
     EBTR1 = OFF          Disabled

   Table Read Protection Block 2:
     EBTR2 = ON           Enabled
     EBTR2 = OFF          Disabled

   Table Read Protection Block 3:
     EBTR3 = ON           Enabled
     EBTR3 = OFF          Disabled

   Boot Block Table Read Protection:
     EBTRB = ON           Enabled
     EBTRB = OFF          Disabled